SHIMANO GROUPSET WITH CALLIPER BRAKES
Bamboo Bicycle Club Team
“The Shimano 105 2×11 gearing system offers a wide range of excellent quality parts. Drop handlebars to offer a range of riding positions combine with lightweight and easy-to-install caliper brakes. Racing tires and a good quality Shimano wheelset for low resistance on the road. The carbon fork allows for a lightweight frame build.”
What's in the pack?
PARTS |
DESCRIPTION |
FINISHING KIT |
Tifosi Uno Road Flared Handlebar
Tifosi Uno Alloy Stem
Uno Alloy Seatpost
Monza Saddle
Tifosi Handlbar tape.
Brand X tapered headset sealed bearings with carbon insert for the steerer, matched depending on the frame kit.
|
GROUPSET - WILL VARY DEPENDING ON RANGE. |
Chainset: FC-R7000 choice of crank length and ring sizes Bottom Bracket: BBR60 BSA or Italian, BB72 pressfit option (Hollowtech adapter not included) Cassette: CS-R7000 Choice of Ratios (11-32 and 11-34 require the GS rear derailleur) Chain: CN-HG601 Front Derailleur: FD-R7000 Rear Derailleur: RD-R7000 SS option for 11-30 max, GS option for 11-32 and 11-34
|
BRAKES |
Brake/Gear levers: ST-R7000 STI including all cables (excludes outer cables) Brakeset: BR-R7000 |
WHEELS/TYRES |
Shimano -
WH-RS100 Wheel, Clincher 24 mm, Black, Front
Shimano -
WH-R100 Wheel, Clincher 24 mm, 11-Speed, Black, Rear
Impac 700c Inner Tubes
Victoria Zaffiro Pro V Tyres 28mm
|
FORK |
Brand X Carbon Calliper Fork
|
Use this accordion to add info such as Materials, Sizing, Features, Shipping and Returns policies
Frame Sizing Guide
If you are in between two sizes we recommend going for the smaller size as you can adjust the frame fit on smaller frame but if the frame is two large then you may be unable to adjust. Alternatively choose a custom frame.
Bike Geometry - Introduction
Frame sizes are referred to as geometry, the geometry encompass the shape, length and the angles of the frame. Each frame type will have certain angles and measurements to give you a ride characteristics associated with the frame type.
A road bike will typically move the rider into a more forward position (seat and head tube angles of 72/73 degrees) to maximise power transfer and elongate the rider to improve aerodynamics.
A dutch style bicycle will be another extreme of geometry moving the rider further back (seat and head tube angles of 68 degrees) on the frame to suit relaxed riding and flat terrain as well positioning the rider in a upright position.
You can read many books on geometry! This a brief insight. Try and select a bicycle that suits your requirement and the geometry should match. E.g Road bike for road usage, gravel for mixed on and off road, MTB for off-road trails.
How to check your fit for a frame.
The key measurements used for a stock frame are you inside leg and overall height.
Height
- Simply stand upright in bare feet, with your back against a wall/doorframe.
- Place a pen or pencil atop your head and parallel to the floor.
- Make a small mark on the surface and measure.
Inside Leg
- In bare feet; stand upright with your back against a wall.
- Place a book/ruler between your legs and level with your crotch.
- Have someone measure the distance from the top of the book/ruler to the floor.
If you find that you fall between 2 sizes, the general rule of thumb is to opt for the smaller size. Why you may ask? Well, it’s because it’s generally considered easier to make a bike that’s a little small fit than one that’s too large. There are certain alterations that you can make to a smaller bike to correct the sizing.
These include: lengthening the stem length, crank length and raising the saddle height. It is much more difficult to adjust a bike that is too large to fit the rider. After all, a seat post can only drop down so far. Whereas fitting too short a stem can result in overly responsive (twitchy) steering.
More about components - Traditionally frames would be built at a local bike shop and the frame would determine the fit with fixed component options.
With modern compact frames most of the final frame fit will be done with components to adjust the position of the rider using a broad range of component options like, seatpost type, stem length, handlebar width etc.
Drop us a email to info(@)bamboobicycleclub.org with any questions